Rent FiTel S-175 V2000 Fiber Fusion Splicer

Details

The S175 V2000 combines the speed and precision of Furukawa engineering with easy-to-use, operator-friendly functionality. The splicer automatically analyzes the fiber type and chooses the correct program. After splicing, detailed data about the splice is available in two presses of the keypad and can be downloaded or printed with ease. The S175 Version 2000 also provides remote PC operation and specific software (optional).

Key Features:

17-second splice time single mode, 90 second protection
Remote PC operation with software package (optional)
Fully automatic core-to-core alignment
Automated splice program selection
Simultaneous viewing of X and Y axis with automatic magnification control
Advanced arc power control with environmental sensing at splice point
Diecast metal top including internal AC power unit and integrated color monitor
Windshield-integrated Fiber Clamp. Just load fiber, close windshield and start

The S175 is the fastest, the smallest and the easiest splicer among the world’s direct core monitoring machines. It is so easy to use that the splicer automatically analyzes the fibre type from Single Mode, Multi Mode and Dispersion Shift Mode and load the suitable splice program. Simply load the fibre, close windshield and press the start key to begin splicing. The durability and reliability is much improved and the maintenance is extremely reduced.

Rent FiTel S-175 V2000

Features:

Silica glass based optical SM / MM/ DSF fibers
Coating / Clad Dia: 0.25-0.9mm / 0.1-0.15mm
Cleave Length: standard 16mm optional 10mm
Average loss:SM: 0.02dB MM: 0.01dB DS: 0.04dB(with identical Furukawa fibers)
Reflection: -60dB or lower
Estimation accuracy: +/- 0.05dB (loss <0.4dB), +/- 15% (loss>0.4dB)
Operating time: Splice: 20s (typical),Heat: 90s (typical for S921)
Tension test: 200g (0.4lbs), option 440g (0.9lbs)
Attenuation splice: 0 to 10 db by 0.1 db
32 Splice Program with one Auto splice mode; 4 pre-programmed, 28 customisable
Inspection: Cleave angle, Fibre end gap, core eccentricity, offset, tilt, micro bending, Bubble at spliced point
Auto sleep mode
Remote control from PC
Display information: operating message, ARC counter, clock, heater status, estimation loss, finder image X Y view
NOTE: A capacity to store 9 languages including:- GB, D, F, I, E, CZ, NL, DK, RUS, P, S, FIN, JP, CHINA, KOREA (some are currently in development)

Specifications:

Applicable Optical Fiber

Silica glass-based optical fibers SM/MM/DSF/EDF/TrueWave®/LEAF®
Coating/Clad Dia.: 0.25-0.9mm
Cleave Length: Standard 16mm or 10mm only for 0.25 mm coating diameter and 16 mm for 0.9 mm coating; Optional
10 mm for 0.25-0.9 mm coating
Applicable sleeves: 40 or 60mm

Splice Performance

Average loss: SM: 0.02 dB; MM: 0.01 dB; DS: 0.04 dB (with identical Furukawa fibers)
Reflection: -60 dB or lower
Operating time: Splice: 17s (typicaly at high speed mode)
Heat: 90 s
Tension test: 200 g (0.4 lbs)

Equipment

Built-in cooling fan
LCD: 5’’ color with anti-reflection coating
Video: NTSC (PIN connector)
Data: RS232C (D-sub 9 Pins male)
Memoria: 400 splices
Sensor: air pressure, temperature, humidity
Lamp: V-Groove illumination

Operating Environments

Temperature: -10 to 50°C (14 to 122°F)
Storage: -40° to 60°C (-40° to 140°F)

Function

Auto sleep mode Remote Control from PC
Attenuation splicing: Optional 0 to10 dB by 0.1 dB
32 splice program with one auto splice mode – 9 pre-programmed; 28 customizable
Inspection: Cleave angle, fiber end gap, core eccentricity, offset, tilt, micro bending, bubble at spliced point
Display information: operating message; arc counter, clock, heater status, estimation loss, finder image X- and Y-views
Message: A capacity to store 9 languages. Contact your dealer for details

Size/Weight

181W x 285D x 181H mm / 6.3 kg
7.1 “W x 11.2” D x 7.1 “H/13.9 lbs.

Power

AC 100/120, 200/240 V 50/60 Hz DC 10-16.5V with LED indicator
Power consumption: Max. 70 W, typical 27 W, sleep 20 W