Rent Fujikura FSM-17R Fiber Optic Fusion Splicer


Fujikura FSM-17R Mass Fiber Fusion Splicer

Key Features

Compact and suitable for aerial splicing
High wind shielding
Fully automatic operation and user friendly
AC/DC converter work as both AC/DC converter and battery charger
High resolution 5 inch color monitor
X & Y fiber observed simultaneously
Automatic altitude compensation

Rent Fujikura FSM-17R

Applicable fibers: SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU -T G.653), NZDS (ITU-T G.655)
Fiber Count: Single, 2, 4
Fiber cleaved length: 10mm
Actual average splice loss: 0.05dB with SM, 0.02dB with MM, 0.08dB with DS, 0.08dB with NZDS. Measured by cut-back method relevant to ITU-T and IEC standards.
Splicing time: Typical 20seconds
Return loss: >>60dB
Splicing modes: 40 user programmable modes and up to 60 modes for reference (factory predetermined setting).
Splice loss estimate: Available
Storage of splice result: The last 600 results to be stored in the internal memory.
Fiber display: X / Y, or both X and Y simultaneously.
Magnification: 89x
Viewing method: Two CMOS cameras and 5.6inch color LCD monitor.
Operating condition: 0 to 3,660m above sea level, 0 to 95%RH and -10 to 50􀋆 respectively.
Mechanical proof test: 2N
Tube heater: Built-in tube heater with 10 heating modes and up to 20 modes for reference.
Tube heating time: Typical 40seconds with FP-04(T) protection sleeve.
Applicable protection sleeve length: 60mm and 40mm
No.of splice/heating with battery: Typical 70 cycles with BTR-06(S) / Typical 140 cycles with BTR-06(L).
Power supply: Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-11. 13.2V DC with BTR-06(S)/(L).
Terminals: USB 1.1 (USB-B type) for PC communication. Video terminal RCA video jack / NTSC.
Wind protection: Max. wind velocity of 15m/s.
Dimensions: 150W x 150D x 150H (mm)
Weight: 2.2kg (2.7kg including AC adapter ADC-11)